resin  
... media is, but am pretty sure it is not a urethane. It may be an acrylic or possibly a polyester - based resin. It's interesting, they do not offer any instruction on the website or information a...
how do I clean and polish epoxy resin finish. This is the interior wood parts for a truck.
... i'm a Ventriloquist from india. I'm trying to make a Ventriloquist dummy. I need polyurethane resin for casting Ventriloquist dummy head. Resin should be in two parts. I want to make a hard...
I need more information on Jesmonite resin. is available in India? What is the process of casting with this resin and how different is it from fiberglass?
Advice please Made a sculpture/ model out of old cardboard beer boxes, and now want to render it with resin (polyurethane?) and plaster. I know an artist who has worked like this (J.Livsey) but don�...
...w will tell you if the idea is sound. I think your results are going to depend on the ratio of bronze to resin in your castings. The action of polishing itself is the surface of the material becomes h...
Please help me find resin color fillers. I've got the resin already. I was told that where I got it would also have hve the fillers but they didn't at home depot.
What I'm doing is ...
...? I am working on a figurative project at school and want a gauz bandage texture. Was looking into using resin-coated bandages, but can't find any. Need something that would burn out directly suc...
[It sounds like you were using polyester resin. The reason it worked with a facecoat is that the resin didn't have the volume to generate its exothermic reaction, which cooks the gas out of the s...
Help! Large crystal ball with casting resin.
I am directing a production of the Wizard of Oz and am trying to make a very large (36-48" hollow crystal ball for the Witch's castle.
Rig...
...st- this is the best way to get good results with a new medium. Make sure you use Ultraviolet Stabilized resin on all exterior surfaces. You cabn fiull the resin with iron fillings, but will have to l...
... that I have then plastic vacuumed formed to create a plastic mould.
Would I be able to directly cast resin into this plastic mould?
If not, I would have to make a plaster cast.
How would I...
Any tips on what the coverage of Aqua-Resin is like when used as a foam coat, with the 10 mil Aque-Veil? I know it will depend on how thick it is mixed and applied, but even a general idea would be he...
it is often used as a filler in resins used for casting purposes.
it is meant to:
1. reduce the amount of resin in the mix;
2. extend the resins coverage;
3. used to add thickness to a resin (ie...
I would look first to the casting resin I'm using. Any casting resin that has been subjected to very cold, becomes separated. The cure is to bring the resin to room temperature then shake very we...
Moldmaking and Resin Casting
The Video
Release Date: August 30, 1999
Topics covered:
Silicone Block Molds Silicone Mold with two part shell Resin Casting under pressure Cold cast Marbl...
Because of the low price, I am sure this piece is cast out of polyester resin with a filler added in such as marble dust or calcium carbonate; the nasty part if the polyester resin; you might consider...
..., the carrier will get thicker and not pour as easily.
on a volumetric basis, I suggest trying 1 part resin : 1 part powder to see how that flows - it depends on what type of resin you are using to...
...white/grey of the background?'
Well It is a plaster base (from the original cast) and fibreglass (resin only) over the top of that and then I sanded that back slightly to make a smoother surfac...
Aqua Resin is a mutant blend of Acrylic and Gypsum with some other ingredients. Water cleanup and Not much of any smell. There is a fiberglass veil that is available that gives the Aqua Resin really g...
hi im trying to create something out of crystal clear casting resin. i want to learn how to use this i would like to create a star mold so i can use the crystal clear resin. a friend of mine died four...
...clay figure. I am needing to make around 3 casts of the clay work and believe that a silicon primary and resin/fibreglass mother is the cheapest and easiest way of going about this (the casts will be ...
Hello.
I want to make a casing for a latex mold using epoxy resin and fibre glass matting. What would anyone suggest as a suitable release agent between the latex and the epoxy resin?
Many thank...
...'ve made a face sculpture in clay. Now I want to make a hard cast of that sculpture in polyurethane resin. The thickness of casting should be 2-3 mm. Can anyone please describe me the process of ...
...ng won't stop it since the color comes from inside the casting as a reaction between the bronze and resin.
The only effect that seems to last is a quick murriatic acid wash to turn the bronze...
...lt to make a few more, providing they are simple shapes as you discribe.
As for casting in a plastic resin, exotherm is a problem, but can be overcome with the proper fillers or resin selection. H...
How many scratches? You can reapir glass optically using polyester resin, but it takes a good deal of expetise and finesse. If not too numerous, try contacting a windshield repair service- the liereal...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 My Sculptures Gallery |
TIP: Write your question in details [ why? ]
Latest Posts
|
more posts...