process 
Well, yeah. But I was trying to think of alternatives. I've been experimenting with a process of adhering a variety of plastics, but obvious the whole 'tefloning' process has been '...
...e the mold to coat the surface of the mold to make a hollow casting; I have used SMOOTH-CAST ROTO for this process - works like a charm.
There are roto-casting machines for this purpose but they ca...
...sin, and also not this subject.
Using a simpler original, try casting in plaster using the waste-mould process. It is a valuable experience to see how the casting process changes the work and this...
I found this character potentially interesting. And I would surely be able to help throughout the whole process, from sculpting, to making a silicone mould and the whole casting process.
You can vi...
...o be interpreted as the artist intends, the artist must be complety involved and participate in the entire process. I write: You mean telling the worker to polish the art more? Making a decision betwe...
...s i forgot mentioning
the pull-marks are from shrinking (hardning) too fast, so slow down your hardning process and probably it would work better to keep the temperature a bit lower in stead of war...
BOB SIMIAN Said:
So I replied:
I will put up a web site in the next few weeks describing the process. As soon as I do I will post a note up in here...
...eresting.
Two things, (and I'm a slip casting potter as well), you mention trouble in the casting process, in years past I've added nylon fiber to the slip to increase its strength. You ...
...re you made with a lot of expensive rubber that may not set.
[Making rubber molds is a rather involved process- it's not possible to explain exactly how to do it in an e-mail message like thi...
True enough in theory, but this presupposes some instruction rather than the process of autodidaction, which apparently we have here since she is looking on the internet for advice about welding techn...
I need more information on Jesmonite resin. is available in India? What is the process of casting with this resin and how different is it from fiberglass?
There is a detailed description of the lost wax bronze process on my web site at http://www.rosenet .net/~jcchism
Thanks! I'm in need of someone to help with the entire design process. There's not a whole lot of money involved, because of the underground DIY style of the project, but there is the potent...
...'m not familiar with,not being a english speaker by native. can you explain for me again what is this process?
thanks...
I am a sculptor working in bronze (castings). Intrested in learning the process of ceramic shell casting.And the availability of the meterials required for it in india.What would be the expenditure r...
Greetings, There is an industrial process called powder metallurgy in which finely divided metal powders, often in the proportions for a specific alloy, are mixed with binders and plasticizers; whereu...
I am sending 4 different web pages that I have found interesting and helpful in the mold making process. Christine
here is the 1st: <A HREF='http://www.burmanfoam.com/index.htm'>Cl...
...m/index.html Very nice work. My favorites are the ShapeShifters, especially Enraptored and Pasht.
The Process of Creating Bronze Sculptures is very interesting reading.
Thanks to you...
...e of time and money.
This is a scenario where the casting media drives the mold material choice and the process involved....
... bronze piece I would mold the original sculpt wich could be any medium and cast it in wax then follow the process so I could make more than one piece - www.sculpt.com is a good resource for wax mat...
...t the door, so I don't have the time right now for a proper response, but I will walk you through the process of how to do it and for as cheap as possible as soon as I've got a little more f...
Most of the time the original gets damaged in the mold making process. that is why it is important to use a high quality silicone for the mold so you can make exact duplicates. If it is a clay sculptu...
...small (about 7" long) semi-abstract figurative sculptures using clay, but I'm not happy with the process/result. I'm not interested in color -- would like the end product to be white. ...
...ery ponderous, and expensive slabs. The thought of just making my own crossed my mind, but apparently, the process requires the components be mixed in vessels capable of resisting the high pressures e...
...r a small run of vinyl toys. i...admittedly have no idea what i am doing.
i am not very familiar with the process of casting....
i was wondering if someone could help me out with some good materials...
... craftsmanship and masterful work. That was a time of what was considered daring experimentation regarding process. This is one reason for that particular interest. Looking back on some of those works...
... a copy! I'd love to have something I could recommend people to buy, that would take them through the process so they could make molds themselves, (the question comes up a lot here) but I've...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 My Sculptures Gallery |
TIP: Write your question in details [ why? ]
Latest Posts
|
more posts...