Please give the procedures of casting the concrete to 100% accuracy
Are you talking about from the ground up and is this for an existing mold or are you also asking about the mold?
Thats great info....
I have tried a few mixes but I am now on
1 part cement - which is Lafarge
2 part sharp sand (is this the same as coarse sand)
2 part aggregate - which is granite,
and i use pva glue
HI MANTRON. iv'e not long finished work so later on i'm going to answer this question today as i'm cream crackered.and going for a catnap.
HI MANTRON. all the mixes are good as gunz said its not science sharp sand mixed with cement on its own makes concrete because sharp sand contains the gravel i mix this four sharp sand to one cement i use hanson multicem.cement its a very light grey cement so like white cement it will work better with cement dies i make it in to a stiff syrup mix if cement is to wet it wont dry out to well and will be week.hanson is a good cement for me because i don't have to ad all the other chemicals.like frost proof or hardener etc.
Thanks for the tip's I will have a look for the hanson multicem sounds like thats just what I need.
Do you know of anywhere who delivery it as it as there doesnt look like many place near me who stock it.
I live in Lancashire Accrington
HI MANTRON.type it on your computer and you'l be surprised how many supplies you'l find homebase sells it that's where i get mines
I have called homebase where I live and they dont have the multicem. So I called B and Q (its a little futher away) and they say they stock it. So I will be going there soon
GREAT.its a really good concreting cement and if you want to ad cement dye mixed with white building sand or mixed with sharp sand or ballast the colours will be good with both if you use any of the two ordinary sands don.t ad any other gravel as ballast and sharp sand contain enough gravel.as they are concrete sands if you use white sand ad the smallest gravel you can find even hard dust gravel.