material  
Hi,
I was wondering if anyone could recommend a suitable material with which I can sculpt small figurines ranging from 1/2 to 1 inch high. Note, these will be one of a kind - I am not planning to ...
...aracters(toys) that need to be flexible when complete. I have looked all over the web, and cannot find what material could be used for these casting. The final product would have to be pretty non-toxi...
what material is the best for creating moulds for use with crystal resin?
...//www.galloturca.com/galatians_files/
dyinggaul.htm
Since I am really a rookie, I am not even sure what material the final serial product should be. I'll say ceramic. Then, you will ask &quo...
[Have you ever tried a 'lost-ice' method? Make the sculpture in ice, encase in a soft plaster material, then pour in a harder plaster or concrete when the ice melts away? I've never had...
...ulptures, and I am becoming increasingly concerned for my health !! If anybody could suggest an alternative material which would do the job could you please inform me. I have heard of many different m...
how to use these kind of materials to make scruptures,or paintins for decoration.anybody having this tpe of knowledge,please help me.i want to make some paintings having quality n fineness n smoothnes...
hi ,,thanks for the same.
could u please help me further please.
what material is used for crystal casting.
what material for taking impression.
would be glad if u could help me
...box with latex or similar to make a reusable mould.
However, I have no idea if latex would be a suitable material to use here. I know there are various forms of latex but which, if any, would be su...
either update the current information or add new material?
Are you going to be maintaining this and should new material be sent to you or can we post directly? I'm not certain how this is wor...
The most archival & high-def producing lifecasting material is Body Double silicone - this material will get every pore in the skin if properly applied.
Here's a link to check out:
http://...
...had great success in not damaging originals.
The secret, as others have mentioned, is to match the molding material to the model material.
I find urethane to be very forgiving, btw....
You might consider wood as a material, if you have access to wood working equipment. Patterns need to be made for moldmaking(unless you already have them), and once you have set up for making one, it&...
... begun doing some sculpture. I picked up a box of 25m white art clay, I have no idea if this is the correct material to use. Is there a good book that will give me some information, like what type wir...
heavier stuff,
I think the question right now is regarding light material, but mig will weld heavier material also.
The concept of penetration applies to mig, and any welding. Actually, I beli...
...o a much deeper passage way to the atmosphere. There is a large variation in these vents depending upon the material used.
There are plugs now available that are made of sintered metal that are po...
...ine will be. I had hoped that it would be possible to coat the bust with rubber (i.e. silicon) or any other material that could be removed from the bust without sticking to it. I had this idea of usin...
Hello everybody..
I was looking for some articles on the web to help me deciding which materials to use to cast my belly and then I found this thread.
I'm 34 weeks pregnant and I really wan...
...type of a toy like object and it's roughly 12" x 12" x 12". I just don't know what material I should use to create the sculpture and where to buy it.
After I make the scul...
[Either to use a whole lot of it, or to build a structure using other materials and cover it with a layer of oil-based clay.]
[Why not? If you're talking about oil-based clay in general, not ...
...s are non-toxic- but also expensive. They are not safe around the eyes or body opennings.
The preferred material is ALGINATE- a water based material that sets in fifteen minutes and can be used sa...
...expertise (that Meyers medallion is great!), you raise some interesting questions about the need for such a material as acrylic stucco, if good old fashioned stucco is so sturdy. I live in NYC, which ...
...ing, out.
As far as the paint on sils, I've only done one, and I was completely satisfied with the material. I brushed two coats of a pourable silly on the face, then backed that up with a ma...
i want polyurethane material in india. plz tell me the detail about it.
[Help us out a little. Does the thing have any undercuts? What material do you want to cast the duplicates in? ]
Andrew Werby
...ump up and down on the piece. Will it resist attack with a brick etc.
Has anyone got experience of this material in these circumstances. Would the work benefit substantially by filling internal ca...
... yellow pages under Insulation, Dow makes a blue foam board in various thickness'. I've used this material alot and find it suitable for modeling and if layered and painted will work for str...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 My Sculptures Gallery |
TIP: Write your question in details [ why? ]
Latest Posts
|
more posts...