info  
<snipping Lauri's info for Jean>
Lauri, I know absolutely zero regarding fired clay, and hopefully other's here will offer more insight to Jean, as I see that s/he has already resp...
...disk for an anglegrinder that had teeth and spacers exactly like a chainsaw.
Can ANYONE give me any info on where i can get these? The main usagebenefit of the tool was working in wet wood, and wa...
What information have you found useful to collect about shows and/or galleries? I'm interested both in information you use to judge whether or not a show or gallery is worth pursuing, and in info...
The New Scientist 24 July ran an article titled Breaking the Mould by Nell Boyce. The article concerned a utectic composition of bronze suspended in wax that can be modelled and fused in a kiln withou...
Hi all,
I am new here so I could do with a little bit of help over here to start me off. Then maybe a lot more help further down the road.
I now understand that I need to purchase the RTV silico...
Hi, I have looked almost everywhere and have been unable to find any information regarding this statue. It is a bronze statue of a black man 50' tall holding a cigar and a cane and is marked ...
This site offers information and opportunities for public installations of artwork, specifically government purchases (and some grants, I believe). It's alot to wade through, but for those intere...
Richard : many thanks for your help and info.
I'll check out the anti-vibe gloves - I assume Harbos will do them?
Do you know anyone in UK who does the German hammers, or are they not rea...
Thanks for the info. I'll check those out.
... read rec.crafts.metalworking and alt.crafts.blacksmithing re. ironwork, and rec.woodworking mostly for info on finishing. A lot of the finishing info applies to finishing ironwork. There are lot of c...
Thanks for the info. I'm glad to know I'm doing the right thing.
***Thanks for the info. Sounds good
Where are you supposed to go for info onfo this???
Thanks for your observations Chris. Good info.
Later,
Welcome to the forum, smackdown and thenoop I hope you both like it here.
That's great info - I hope ablusive will read this soon
Sure;
There is a lot of information about materials that could be posted; unfortunately people do not think to seek info until it is too late.
...plasticizer will not hurt the latex and have poured hundreds of times with it. I'm still gathering info and will do some tests on my own with different super amounts in the mix....
I'ed like to know more about this. If you have some time maybe you can share your info with me. I've never cast anything before but have worked in clay. I to would like to save some of my wo...
Thanks for going to the trouble to post all that info. I was feeling negligent for not getting it posted. I fully agree with your statements regarding wood not being a 'crop'.
Great info Chris, thanks.
The SI chart shows 8/2% demolds in about 2 1/2 hours, using the 9.5/.5 ratio, what's the demold time?? Before lunch??
Hey, my work has taken me into that direction as well... I found it very difficult to find that information as well, so I have been forced to push in waist high and figure it out myself.
If you ha...
...ot so sure about the cfm) what kind of airsupply are you using? dont have any leaks.
Thanks for the info...
...irection? Specifically I am interested in doing a cavity type of piece with in a cube of plexiglass
Info on materials, casting, techniques, etc....?
I have seen a few interesting pieces on the...
I think to answer this question, we would need a little more info, such as what is the model made of. I'm assuming you're talking about making rubber molds over a model.
Judy
...forum on the web you might check out called The Effects Lab
www.theeffectslab.com
There is a lot of info here you might find useful....
... the mayor Dutch museums. He received the prestigious David Roell award for his oeuvre. Click below for info and photographs of his objects. Visit page:...
...
I understand it can be polished/patinated to achieve a bronze effect, what do you use for this?
Any info gratefully received ...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 My Sculptures Gallery |
TIP: Write your question in details [ why? ]
Latest Posts
|
more posts...