My ProfileKeep Up to Date:
 Blog  Forum |
expensive
...o hang on the walls of my living room and bed room. I saw something like this at a dealer, but it was way to expensive, so I figured, how hard can it be? The best thing I've been able to come up with ...
...onstant temperature (approx. 120 degrees). I use this in my plaster molding studio. And suggestions for an inexpensive piece of equipment or other device would be appreciated....
...y sculptors! (except where prohibited by law). Unfortunately, they are available only as very ponderous, and expensive slabs. The thought of just making my own crossed my mind, but apparently, the pro...
... closes with tape, but that's not all that obvious when you look at it. Still, I kept looking and found an inexpensive case with a mirror back that closes more securely and may put a luggage lock on i...
...er makes thickness.
Now I found a product Silicex RTV 847 and 863 from Rhone-Poulec in Spain. It is really expensive, ca. 75 USD per Kg. The wrapping mentioned 5% catalysator but not if it is tin or...
...re ways to slow down the curing process even more than what Lynn Olson describes?
2- Can any one suggest inexpensive mechanical ways to mix the cement with so little ater without introducing air int...
Hi. We're two sculptors who recently moved to southern Ontario from Spain. We're finding the foundries are charging 5 times the rate they did in Spain, a stultifying fact. A small 12' figurative bronz
...ronze(lost wax). It is possible to get anything cast in stainless steel? What kind of molds do they use? how expensive? Thanks M McMillian...
...e material used in creating the model and am seeking a 'simple' viable solution.
Is there a easy to use, inexpensive substance that could be used to 'coat & seal' modeling clay, to give it a glassy ...
|
Latest Hot PhotosLatest Posts
|
Copyright © 2006 - Jan 2009 My Sculptures Gallery