casting   
We are designing some masters for casting some rubber characters(toys) that need to be flexible when complete. I have looked all over the web, and cannot find what material could be used for these cas...
...culpture in clay. Now I want to make a hard cast of that sculpture in polyurethane resin. The thickness of casting should be 2-3 mm. Can anyone please describe me the process of cast making? And I don...
...ja-Safe, which does not contain any crystalline silica (a known carcinogen. http://www.smooth-on.com/Life-Casting-Alja-/c3_1185/
index.html
I have no idea what the casting media is, but am pretty...
Hello!
I'm interested in recipes for mixing lightweight concrete (colored) for casting shapes for table bases, and garden scultures, etc.
I'm thinking of products like Syndecrete (ht...
Hi all. I have just started to use the above for casting and wonder if there are any resources on the internet on how to use it. I have a few newbie questions:
What is the correct cement/water/san...
... a response.
I'm translating a book from Korean to English. In the book, the author refers to wax casting, pulled casting and centrifugal casting. The first term I've seen in a book (alt...
i am casting a vessel sink. i am a ceramic moldmaker with 5 yrs experience with a tile business. i made all the masters for the tile co. and am familiar with two piece molds, but not slip casting.?
Help! Large crystal ball with casting resin.
I am directing a production of the Wizard of Oz and am trying to make a very large (36-48" hollow crystal ball for the Witch's castle.
Rig...
...verted mass. The mass containing the wax is put into a oven and the wax burnt out, hence the term lost wax casting. The dental trade is credited with the process of centrifugal casting. The wax is enc...
I am a sculptor working in bronze (castings). Intrested in learning the process of ceramic shell casting.And the availability of the meterials required for it in india.What would be the expenditure r...
hey,
you should first of all try to use a casting polyester resin(works way better than laminating resing),
besides that while casting polyester I allways use only up to 0,5%(small things maybe 0...
...(alginate) and Body Double (silicone); the body Double is archival, Alja-Safe is single use - possible two castings at best if the mold is carefully demolded.
Are you planning on melting clay &...
Hi
I'm looking for help in developing a way to hang (from the wall) a casting made from plaster (like a cast for broken bone) of my bust or hip or butt. I'm thinking a 'z' shaped...
Me too! Please add my address to the pile. I'm currently interested in cheap casting of small bronzes.
... site on www.bodyscape.net.nz
Although my studio is in New Zealand...I am publishing worldwide a life casting instruction manual.
Sincerely,
Olivier Duhamel...
I have never done any casting before but I would like to make a series of 20" x 30" castings of the compacted, ridged sand you find on the beach when the tide goes out.
I thought I would ...
hi
i have a d julian hayes erotic bronze casting,what is the best way to find its walue,or sell?
Do you mean rotational casting to cast hollow, 'six side' items, usually large, or do you mean spin casting for small solid objects in pewter or resin?
The heart of both these systems is...
...hly but don't know what to use as a 'release agent'. Also, does anyone know of a source for casting plaster & cold-curing silicone here in the UK. Many thanks in advance,...
I've been doing some bronze casting and need to know where I can buy pre-mixed sand for sand molds. I've heard of a product called Petrobond but don't know where to purchase. Any ideas?...
It was a crystal clear casting resin...for craft products.
The strange thing is that I think I have found a way to get a good cast from the mold(s)..I ended up pouring a small amount in and swirli...
how to make a dye for metal casting and cast schulpture in metal?
... about the passing of George Segal I start doubting that what I'm doing has any real purpose. If life-casting can be considered great art(or a means of creating great art) where is the place for ...
The most archival & high-def producing lifecasting material is Body Double silicone - this material will get every pore in the skin if properly applied.
Here's a link to check out:
http://...
...st mold. Remove this case, and the first mold, leaving the model fixed on the table.
You can now begin casting into the first mold.
Release agent again on the model if needed. Put the pour cas...
...be able to help a little more.
I'm a sculptor myself and help lots of people with their moulding and casting, just stummbled upon this site....
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 My Sculptures Gallery |
TIP: Write your question in details [ why? ]
Latest Posts
|
more posts...