cast  
Hi, I am doing a belly cast for a friend, and I used the plaster bandage to make a fairly thin copy of her belly.
I would like to lay fiberglass or something tough into the plaster bandage negative...
i want to make a cast of my boobs, whats the best way to go about this?
Emma x
If production cost is your main concern just cast the piece in polymer plaster/polymer concrete/sandfilled resin and then spray paint bronze, gold, copper or anything else you want. Get some colored s...
Ethan,
Are you speaking of present day 'cast stone', or the cast stone that we see embellishing the older buildings??
The cast stone procedure that I am familiar with is produced wit...
how do i make a plster cast of my breasts?
Silicone molds would accommodate your casting media much better. Alginate contains water & that will interract with your casting media.
I have used Body Double silicone successfully many times to...
how to make a dye for metal casting and cast schulpture in metal?
'EXTREME EROTICA' CAST BRONZE SCULPTURE BY JULIAN HAYES.
Have added some detailed photos if you saw it without the detailed photos which bring it alive.
It's worth having a look...
TECH TIP: To Remove (De-Vest) Shellspen Ceramic Shell from newly cast Bronze:
Place casting on wood surface or canvas filled sand bags. Hammer pour cup and sprues, removing most Shell.
...
Hello, i have made a wax cast of my head (in two parts) that I have then plastic vacuumed formed to create a plastic mould.
Would I be able to directly cast resin into this plastic mould?
If no...
[Why don't you give us a clue as to the material you're trying to cast this in? It doesn't sound like a problem for bronze (although 1/4 inch is too thick) or slip-cast ceramic.]
An...
Hi everyone,
I've made a face sculpture in clay. Now I want to make a hard cast of that sculpture in polyurethane resin. The thickness of casting should be 2-3 mm. Can anyone please describ...
I Used winterstone to cast the relief of the 3 horse heads on the site below. its in the center bottom of the group of pictures. Its 4 feet in diameter and weighs about 105 lbs. cast ready to hang. Yo...
...bber is and perhaps where I can order some from.
I just finished two sculptures in clay and want to cast them into plaster so I can chase them before making urethane molds. I figured that if it�...
WOW!
Did you create that? Thats amazing!
On first blush I suspect it will be very difficult to cast in clay (ceramic). Looks like there will need to be multiple parts.
An alternative is to cast i...
Moldmaking and Resin Casting
The Video
Release Date: August 30, 1999
Topics covered:
Silicone Block Molds Silicone Mold with two part shell Resin Casting under pressure Cold cast Marbl...
.... The only reason I can think of for 'moving on to wax,' would be if you wish to have bronzes cast from your wax originals. Even there, though, you can still work in Super Sculpey, make moul...
hiya there, i am relatively new to sculpture and the whole casting process so please excuse my ignorance!
I want to be able to make an eventual cast of my face and also a copy of my face with embel...
... is usually used to describe sheet stock acrylic media.
What you seem to be referring to is Acrylic casting.
It requires quite a lot of equipment and experience to safely cast acrylic. The che...
For a while I used expensive casting silicone, and found out from a long-time foundry owner a little secret that has saved me a TON of money.
He uses silicone caulking (bought at Wal Mart) and I&#...
Do you mean rotational casting to cast hollow, 'six side' items, usually large, or do you mean spin casting for small solid objects in pewter or resin?
The heart of both these systems is...
How about cast bronze? Seems to hold up well outdoors! :>
... wax = more gloss. When the wax is dissolved use a long soft bristle brush to apply the mixture to your cast, it soaks in quickly. If your casting is small, you can dip it in the mixture. Let your cas...
... thin walled metal pipe, one gas barbeque fitting, one 1 1/2' pvc pipe fitting [for air control] a cast iron fitting on the hot end and one small vacuum cleaner set on 'blow'. the vacuu...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 My Sculptures Gallery |
TIP: Write your question in details [ why? ]
Latest Posts
|
more posts...